- Windows 7 Professional 64 Bit Full Version
- Inpa Windows 10 64 Bits Descargar
- Inpa Windows 10 64 Bits 1
- Inpa Windows 10 64-bit Installation Guide
Dec 08, 2016 Download BMW INPA Windows 10 for K+DCAN Cable December 8, 2016 sales Auto Diagnostic Tools 0 Here is an easy way to install BMW Standard Tools to work with K+DCAN USB cables, developed by dallas.dainers and proved to be done in less than 15 min depending on the processing power of your machine. Apr 13, 2017 forum.e46fanatics.com/showthread.php?t=1126314. INPA Windows 10 Download Free: Confirmed to Work Perfect! Outils de diagnostic de voitures. Janvier 3, 2019 sales. I want to share Kpl BMW Standard tools and very. Feb 14, 2017 In my opinion, Windows 7 x86 will always be the reference platform for BMW Standard Tools 2.12. However, the Windows operating system continues to evolve and since the Windows 8 train wreck is behind us, I decided it was time to update my DIY for Windows 10 x64 (64-bit.) Because Windows 10 was never qualified by the BMW Group, it should be.
BMW INPA Software is factory BMW diagnostics software that connects to all the systems and modules on BMW cars not just engine like generic scanners, it reads all BMW trouble codes and gives live diagnostics and data and GUI pages and test functions…
In this article include:INPA ediabas 6.4.7 donload,INPA ediabas 5.02 download,INPA 5.0.6 ediabas downloadINPA 6.4.3 ediabas download,BMW INPA 5.02 and Ediabas 6.4.7 download,all of the can work with BMW INPA K+CAN Cable.
INPA Latest version Diagnostic Software Function List:
Support of all ECU use cases in Engineering, Test, Production and After Sales
* Specification of ECU’s diagnostic data
* Reading and clearing error memory
* FLASH data uploading and downloading
* Reading measurement value
* Input/output control
*Calibration of single ECU variables
* Coding of ECU variables
* CAN (controller Area Network) bus mode emulation
* Integrated solutions for on-board/off-board
* Fast and simple configuration of GUI and communication data instead of programming
*Customer specific protocols supported
* Long term application by supporting widespread ASAM standards
* Language is English and German
BMW INPA Software Coverage Vehicle List:
1 series E87
3 series E30 E36 E46 E90
5 series E34 E39 E60 E61
6 series E63 E64
7 series E32 E38 E65 E66
8 series E31 E52
Mini R50 R52 R53
X series E53 E83
Rolls Royce
Z series E85 E52.
BMW INPA software, free download:
Below list the free download link collect form internet,if you find the link is invalid,pls tell me.
INPA 6.4.3 Full.rar (thegrayshadow.com)
INPA 6.4.3 Full.rar (mediafire.com)
INPA Ediabas 6.4.3(MEGA)
INPA Software (mediafire.com)
INPA 5.0.6 rar (thegrayshadow.com)
INPA ediabas 5.02 download (tested work 100% ok)
BMW INPA E46:
This part share some BMW INPA work case on BMW E46 show as below:
BMW INPA E60:
This part include some content about BMW INPA software or cable working cases on BMW E60
BMW INPA Reset BMW E60 Airbag Waring Light
How to Reset & Relearn E60 BMW Automatic Transmission with INPA
BMW E60 Coding by INPA and NCS Expert Cable
For more about BMW INPA E60,please check:BMW INPA E60 Coding/Diagnose Guide
BMW INPA Win7 Installation Guide
BMW INPA Win8 Installation Guide
BMW INPA Win10 Installation Guide
Win7 Win8 Win10 Installation please check this article:
Notice of using INPA***
1.Before using this equipment, keep the battery of notebook fully charged to avoid battery broken. Don’t charge the battery while diagnosing (the charger may interfere with diagnosis). Before charging, discharge the battery. You may knock down the battery and connect the power line during long time diagnosing. To make sure the battery life. 2***65289; While testing, make sure the diagnostic lines well connected.
3.Be sure to start diagnosing after all icons on bottom right of screen displayed regularly.
4.After finished diagnosing, back the screen to the main interface, then shut down the key and pull out the connector.
5.Don’t cut the power or connector during test.
Don’t touch the high temperature components in carriage during test.
3.Be sure to start diagnosing after all icons on bottom right of screen displayed regularly.
4.After finished diagnosing, back the screen to the main interface, then shut down the key and pull out the connector.
5.Don’t cut the power or connector during test.
Don’t touch the high temperature components in carriage during test.
If you find the download link is invaild,click to download:BMW Standard Tools 2.12 Free Download
include:
EDIABAS: 7.3.0 1.1
-Tool32 4.0.3
-CANdriver 2.5.0.0
WINKFP 5.3.1
– CoAPI 3.13.2
NFS 5.2.9
– KMM SRV 4.31.1.0
INPA 5.0.6
NCS Expert 4.0.1
BMW INPA Win7 Installation Guide:
1. Setup/Configure your OBD2 USB Cable
- Plug in the cable into a USB port on your computer, you must ONLY use this USB port from here-on for this cable. If your computer is connected to the internet it should automatically search and install in the USB cable drivers. If your computer does NOT automatically detect the cable, you may need to use ‘Device Manager’ to manually update/select the driver.
- Once installed, go to Control Panel -> System -> Then click on the Hardware tab, then click on Device Manager.
- Locate the entry ‘USB Serial Port’ in the ‘Ports’ section of Device Manager. It should read ‘USB Serial Port (COMX)’.
- Right-click on the above and select ‘Properties’, then click on the ‘Port Settings’ Tab and then click on ‘Advanced’.
- Change the ‘Com Port Number’ entry to ‘COM1’.
- Change the ‘Latency Timer (msec)’ to ‘1’.
- Click on ‘OK’ and close all the windows, restart your PC to confirm all the changes.
2. Install INPA/EDIABAS 6.4.3 and 4.4.7
- Extract the contents of the downloaded file ‘INPA-6.4.3-full.rar’ and you’ll find a .NRG file. This is a CD image that you’ll need to either burn to a CD or extract to a folder using a tool such as ISOBuster.
- Once extracted, go into the following folder ‘/REFERENZ/INSTALL/’, right-click on ‘INSTPROG.exe’ and select ‘Properties’, click on the Compatibility tab and change the dropdown to Windows XP SP3 as the Compatibility Mode, also tick ‘Run As Administrator’, then click ‘Ok’, then double-click the file to run the installation.
- Select ‘English’ as the language and click ‘Next’.
- Select ‘Next’ until asked for ‘Configuration’, scroll to ‘BMW Group Rectification Programs UK’, click ‘Next’.
- Tick the option ‘Complete’ for all of the options shown.
- Select ‘Next’ and allow the installation to start.
- After a minute or so, installation will complete, close the Window.
3. Verify environment variables
- Go into Control Panel -> System -> Advanced System Settings.
- Select ‘Environment Variables’ and then verify that the System Variables ‘TMP’ and ‘TEMP’ both contain the path ‘C:EDIABASBin’ within the ‘Value’ string – for instance “C:WindowsTemp;C:EDIABASBin”.
4. Prepare Installation Files
- Extract the contents of the downloaded file ‘INPA_502_Updated.rar’.
- You’ll use the contents of this archive during the next three steps.
5. Install BMW Tools
- From the above extracted file set, find the file ‘Step 1_ Install BMW Tools.exe’, right-click on it and select ‘Properties’.
- Click on the Compatibility tab and change the dropdown to Windows XP SP3 as the Compatibility Mode, also tick ‘Run As Administrator’, then click ‘Ok’
- Double-click on the above file to start the installation.
- Set the Destination Path C:BMW Tools (Don’t change this path) -> ‘Install’ -> ‘OK’.
- Select ‘English’ -> ‘Continue’ -> ‘Continue’.
- Select ‘C:’ -> ‘Continue’.
- Select ‘Skip’ -> ‘Next’
- Accept the defaults for programs to update, then click ‘Next’.
- Select ‘Com1’, ‘OBD’ and ‘USB to Serial Adapter’ -> ‘Continue’ -> ‘Continue’.
- The installation will begin and complete.
6. Install INPA/EDIABAS 6.4.7 and 5.0.2
- From the above extracted file set, double-click the file ‘Step 2_ Install INPA.exe’.
- The Destination Path should be ‘C:temp’, leave as it is and click ‘Next’.
- Choose ‘English’ and select ‘Continue’ and ‘Continue’.
- Select ‘C:’ and then ‘Continue’.
- Select ‘BMW Group Rectification Programs UK’ and click ‘Continue’.
- Tick ‘Update’ for all options where not grayed out, then ‘Continue’.
- Select ‘OBD’, then ‘Continue’ and ‘Continue’.
- The installation will begin and complete.
7. Install OBD Setup
- From the above extracted file set, double-click the file ‘Step 3_Final Update.exe’.
- The Destination Path should be left as it is, then select ‘Install’.
- Select ‘Yes to all’.
- Once completed, the window will close itself.
8. Complete Installation
- From the above extracted file set, double-click the file ‘serial port.reg’.
- When prompted, select ‘Yes’ and ‘Yes’. You will receive confirmation that your registry has been updated.
- Locate the file ‘C:EDIABASBinobd.ini’ and copy this file into your Windows folder.
- Edit the file ‘C:EC-APPSINPACFGDATINPA.INI’ in Notepad, locate the section that starts with ‘//F3’, remove the slashes at the beginning of the three lines of text, and amend any instance of ‘F10’ to ‘E46’.
Check more details about BMW INPA Software Installation on Win7 Win8 Win10
Readers who read this article also read:
How-to: install BMW INPA 5.0.6 software on Windows 7 or Windows 8 32 bit or 64 bit to get it to work with a K+DCAN cable.
Software version: INPA 5.0.6
Operation system:
Windows 7 32 or 64 bit
Windows 8 32 or 64 bit
Installation tips and guides:
STEP 1: INSTALLING BMW STANDARD TOOLS
STEP 2: INSTALLING INPA
STEP 3: INSTALLING NCSEXPERT IN ENGLISH
STEP 4: INSTALLING & CONFIGURATING DCAN INPA CABLE
STEP 5: CHANGING THE OBD.INI
STEP 6: SPDATEN FILES
In detail…
STEP 1: INSTALLING BMW STANDARD TOOLS
Download and install BST 212
Since BST (BMW Standard Tools) was designed for Win XP 32bit operating
Systems, users have faced issues with tools like WinKFP and NCSExpert since Win
7 64bit systems have been introduced. Running in XP compatibility mode just
wasn’t enough. Presenting you with several errors or not running at all. Only
solution was to install on a XP system or like me… XP VMware. Well that all
changed with BST 2.12 which works on 32 or 64bit systems.
WIN 7/8, 32/64bit OS
STEP 2: INSTALLING INPA software
(will need it after coding certain modules such as DME for CAS
or EWS Alignment)
Download and install my version of INPA 5.06 with Fxx Support by simply
replacing the existing folders with the folders provided in the
Replace C:EC-AppsINPA
Replace C:EDIABAS
STEP 3: INSTALLING NCSEXPERT IN ENGLISH
Download and install NCSEXPER32_ENG.zip
Copy and replace contents in the .zip file with contents in C:NCSEXPERBIN. Now
NSCExpert is in English but you will find the Hot Keys do not work. This is a bug a
fellow MHH member discovered and haven’t really worked on trying to fix it so for
the time being just click on the F# key with your mouse.
Not done yet with NCSExpert. Need to import profiles to NCSExpert. How? well
download the PFL.zip and copy and replace all contents from PFL.zip
to [b]C:NCSExpertPFL. (you will also find a lot more PFL’s by searching for
NCSExpert profiles in Google)
Now you have a working WinKFP and NCSExpert with profiles loaded on your PC
we can continue to Step 4.
Windows 7 Professional 64 Bit Full Version
STEP 4: INSTALLING & CONFIGURATING DCAN INPA CABLE
Configure your DCAN/INPA cable. If you followed my steps correctly than your
EDIABAS should already be configured to STD:OBD for use with the INPA cable. If
not you can download ediabas-konfigurator from here if it is not already in
your C:EDIABASEdiabas-Konfigurator folder. This tool allows you to easily
change the ediabas.ini to your desired interface. So if you are switching
from INPA to E-Sys you could use this to switch from STD:OBD to ENET.
Now to set your COM Port we must first find which COM port is being used for
your cable.
Connect your cable to your PC (some may require a 12v supply to power the
cable)
Allow the device drivers to install (for best driver use the driver that came with
your cable. If not then let windows install the best suitable driver for it)
Navigate to Control Panel, Device Manager, and scroll to Ports (COM & LPT)…look at the pic
So in my case it’s COM5. So we need to change this in the obd.ini file located in
the c:ediabasbin folder. But first lets make some changes to the cable.
Right click on your INPA cable driver for example mine is labelled “USB Serial
Port” and click on properties. Now in the property window click on the advanced
tab.
Now every driver is different but the important part is the settings such as latency
timer and received and transmit bytes. See pic bellow for the ideal settings. You
may also change the COM port number here as well for tutorial I left it at 5. Once
your changes are done we can proceed by clicking OK to accept the changes. No
close all windows to return to the desktop.
STEP 5: CHANGING THE OBD.INI
Navigate to C:EDIABASBIN and find file obd.ini and open it with an editor such
as notepad.
First 3 lines will look like this…
[OBD]
Port=Com1
Hardware=USB
So we need to change the Port to reflect our INPA cable which in our case is COM
port 5. So change it to look like this…
[OBD]
Port=Com5
Hardware=USB
When done click File -> Save and exit out.
Very important to remember which USB port you connected your cable to as
plugging it into a different USB port will allocate the INPA cable to a different
COM port and neither tool will see the cable until the original USB port is used
again or changed in device manager and obd.ini as mentioned above.
Inpa Windows 10 64 Bits Descargar
Now to test if your cable installed correctly. Plug it into the vehicle’s OBD port and
open INPA. You should look like this…
If not follow the above steps again and correct your error.
STEP 6: SPDATEN FILES
Download and install SPDaten files of your choice (always recommend the latest)
in this case it is 51.2. Once downloaded you can now follow the instructions
provided bellow labelled “How_to_start_WinKFP.pdf” this will explain how to
import the SPDaten files to WinKFP.
Edit to update:
For NCSExpert to install or update the daten files, copy the files from SP-daten-
E##daten to the C:NCSEXPERDATENE## (where E## is whatever chassis
you’re updating). You will also want to copy the files from SP-daten-
E##SGDAT to C:NCSEXPERSGDAT (they’re not separated into different chassis
in NCS Expert, so you just want to copy and paste everything to that directory.
Overwrite everything it asks about). Then copy the files from SP-daten-E##ECU
to C:EDIABASECU
After copying the daten files to c:NCSEXPERDATENE## copy the following files
to the following locations:
Inpa Windows 10 64 Bits 1
copy C:NCSEXPERDATENE##*.000 C:NCSEXPERDATEN
copy C:NCSEXPERDATENE##*.DAT C:NCSEXPERDATEN
copy C:NCSEXPERDATENE##*.ASC C:NCSEXPERDATEN